Home > News > Industry News

The Performance of the Hydraulic Pump Solenoid Valve Failure

2022-02-26

The performance of the hydraulic pump solenoid valve failure
The main manifestations are: can not enter water or keep entering water; can not display the temperature of the water and the position of the water; can not work after power on, can not be turned off and so on. Because the solenoid valve is a component used to control the water intake of the machine, if it is broken, it may lead to the failure of water supply or the continuous flow of water. If it is damaged, it should be replaced in time to avoid affecting life.
Precautions for the use of solenoid valves
1. Always check its sealing performance. Damage and aging may affect the sealing. Once the sealing is weakened, it will affect the normal use of the machine. Seals generally have hard seals and soft seals. We can listen to the sideways when it is working, and see if there is any sound of air leaking. If you can't judge, you can also test it with soapy water. If there is air leakage, bubbles will appear. If the air leak is confirmed, the seal can be changed.
2. The working environment should also be considered when selecting equipment. If it is in a place where there will be a large chemical reaction, corrosion-resistant equipment should be preferred. This is because different equipment has its own characteristics. Do not mix them. Otherwise, it will also affect its service life. It must be installed correctly. The direction of the installation corresponding to the arrow should be consistent with the direction of the medium, and there should be no reverse pressure difference, so as not to fail to start normally.
3. To keep the inside of the pipe clean, there should be no hard objects and other impurities, otherwise the machine will be stuck and cannot work. You can install a filter in front of the machine, which will make it easier. The voltage should also be paid attention to to ensure that the voltage is stable during operation. If it is unstable, voltage stabilization measures can be taken.
1G925 - 60011 Flexible excavator flameout switch