MFZ2-3C Excavator solenoid valve coil AC220V 24V 55mm 22mm

MFZ2-3C Excavator solenoid valve coil AC220V 24V 55mm 22mm

Product Introduction

MFZ2-3C Excavator solenoid valve coil AC220V 24V 55mm 22mm The solenoid valve coil is designed to convert electrical energy into lateral motion. Coils usually consist of copper wire wound around a hollow bobbin or tube, so when current flows through the coil, a magnetic field is created

Product Parameter（specification）

Product Feature and Application

MFZ2-3C Excavator solenoid valve coil AC220V 24V 55mm 22mm By placing the solenoid valve coil on a ferromagnetic core (usually a magnetic 430F stainless steel armature), the resulting magnetic field causes the plunger to slide further up the magnetic field (into the coil), creating an opening. This in turn can be used to control direct acting solenoids, assisted lift solenoids or servo/pressure assisted solenoids.

Product Details

1. The power parameters must be correct

2. The electromagnets at both ends of the electromagnetic directional valve cannot be energized at the same time.

3. The reversing frequency of the electromagnetic reversing valve is not more than 4 times/second

4. The force characteristic of the return spring should be lower than that of the electromagnet. Reasonable choice, the larger the margin, the more reliable. Built to last.

5. Applicable to electromagnetic in accordance with JB/T 7434-94 and DIN43650 standards

6.MFZ2-3C Excavator solenoid valve coil AC220V 24V 55mm 22mm