230 - 2782 Length 870mm Hydraulic Hose Pipe

230 - 2782 Length 870mm Hydraulic Hose Pipe

1.Product Introduction

230 - 2782 Length 870mm Hydraulic hose pipe Tubes and pipes for hydraulic n applications are internally oiled before the system is commissioned. Usually steel piping is painted outside. Where f lare and other couplings are used, the paint is removed under the nut, and is a location where corrosion can begin. For this reason, in marine applications most piping is stainless steel.

2.Product Parameter（Specification）

3.Product Feature and Application

◉ 4230 - 2782 Length 870mm Hydraulic hose pipe is graded by pressure, temperature, and fluid compatibility. Hoses are used when pipes or tubes can not be used, usually to provide flexibility for machine operation or maintenance. The hose is built up with rubber and steel layers. 

◉ A rubber interior is surrounded by multiple layers of woven wire and rubber. The exterior is designed for abrasion resistance. The bend radius of hydraulic hose is carefully designed into the machine, since hose failures can be deadly, and violating the hose's minimum bend radius will cause failure. Hydraulic hoses generally have steel fittings swaged on the ends. 

◉ The weakest part of the high pressure hose is the connection of the hose to the fitting. Another disadvantage of hoses is the shorter life of rubber which requires periodic replacement, usually at five to seven year intervals.

4.Product Details

The inner diameter of the hose: 62.5 mm (2.46 in)
2. Temperature range: -40°C to 125°C (-40°F to 257°F)
3. Burst pressure: 5.5 bar (80 psi)
4. Maximum working pressure: 1.4 bar (20 psi)