Tm60601 Proportional Pilot Solenoid Valve 20bar

Tm60601 Proportional Pilot Solenoid Valve 20bar

1.Product Introduction

TM60601 Proportional pilot solenoid valve 20Bar The proportional valve has undergone strict quality inspection before leaving the factory, including static characteristic test (input current pressure characteristic test, internal leakage test and load characteristic test) and dynamic characteristic test (frequency response test and transient response test)

2.product parameter（specification）

3.product feature and application

TM60601 Proportional pilot solenoid valve 20Bar Measure the resistance of the solenoid coil, turn off the ignition switch, disconnect the plug CN between the proportional valve of the main pump and the output interface of the pump controller, measure the resistance between the two wires and the resistance value between the ground wire and the fuselage, and judge the solenoid of the proportional valve. Whether the coil is shorted, open, or grounded.

4.Product Details

1.The wire package adopts plastic particle injection molding to ensure high and low temperature resistance, oil resistance and corrosion resistance.

2. The valve body is heat treated to ensure the durability of the products.

3. The use of high strength stainless steel material, the accuracy of positive or negative 1 wire, to ensure that the spool movement freely.

4. All products have passed strict inspection to ensure that each product can work reliably.

5.TM60601 Proportional pilot solenoid valve 20Bar