Excavator starter motor DH150-7/DH220-5 28Volt 4.5KW 11T

1811001910 Excavator starter motor DH150-7/DH220-5 28Volt 4.5KW 11T

Product Introduction

1811001910 Excavator starter motor DH150-7/DH220-5 28Volt 4.5KW 11T The function of the excavator motor (starting motor) is to generate torque, which consists of a magnetic field, armature and brush assemblies. The excitation mode of the motor (starter motor) is series excitation. Due to the large working current, large torque and short working time of the starter, it generally does not exceed 5 to 10 seconds. Therefore, the parts are required to have high mechanical strength and low resistance, and most of the windings are wound with rectangular cross-section wires.

Product Parameter（specification）

Product Feature and Application

1811001910 Excavator starter motor DH150-7/DH220-5 28Volt 4.5KW 11T The function of the starter motor is to start up the combustion engine. An electric motor forms the basis of the starter motor. When the starter switch is turned on, the starter relay turns on the electric motor. This motor drives the starter gear ring via the pinion gear.

Product Details

1.Don’t press the gas while starting the engine.

2.Always make sure the car is in park before starting the engine.

3.Don’t hold the key in the start position for more than 30 seconds.

4.If the engine isn’t running, avoid leaving the key in the on or accessory position as it can drain your battery.

5.If the engine is slow to start, or if it stalls after starting, have it inspected right away.

6.Always sit in the driver seat to crank the car (don’t crank it by leaning into the car to turn

7.1811001910 Excavator starter motor DH150-7/DH220-5 28Volt 4.5KW 11T